Configuration file

Information is actual for version 0.10.6

Section	ID	Type	Description
[video]	fullscreen	boolean	if true, Stellarium will start up in full-screen mode. If false, Stellarium will start in windowed mode
[video]	screen_w	integer	sets the display width when in windowed mode (value in pixels, e.g. 1024)
[video]	screen_h	integer	sets the display height when in windowed mode (value in pixels, e.g. 768)
[video]	distorter	string	This is used when the spheric mirror display mode is activated. Values include none and fisheye_to_spheric_mirror
[video]	minimum_fps	integer	sets the minimum number of frames per second to display at (hardware performance permitting)
[video]	maximum_fps	integer	sets the maximum number of frames per second to display at. This is useful to reduce power consumption in laptops.
[projection]	type	string	sets projection mode. Values: perspective, equal_area, stereographic, fisheye, cylinder, mercator, or orthographic.
[projection]	viewport	string	how the view-port looks. Values: maximized, disk
[spheric_mirror]	distorter_max_fov	float	Set the maximum field of view for the spheric mirror distorter in degrees. Typical value, 180
[spheric_mirror]	flag_use_ext_framebuffer_object	boolean	Some video hardware incorrectly claims to support some GL extension, GL_FRAMEBUFFER_EXTEXT. If, when using the spheric mirror distorter the frame rate drops to a very low value (e.g. 0.1 FPS), set this parameter to false to tell Stellarium ignore the claim of the video driver that it can use this extension
[spheric_mirror]	flip_horz	boolean	Flip the projection horizontally
[spheric_mirror]	flip_vert	boolean	Flip the projection vertically
[spheric_mirror]	projector_gamma	float	This parameter controls the properties of the spheric mirror projection mode
[spheric_mirror]	projector_position_x	float	This parameter controls the properties of the spheric mirror projection mode
[spheric_mirror]	projector_position_y	float	This parameter controls the properties of the spheric mirror projection mode
[spheric_mirror]	projector_position_z	float	This parameter controls the properties of the spheric mirror projection mode
[spheric_mirror]	mirror_position_x	float	This parameter controls the properties of the spheric mirror projection mode
[spheric_mirror]	mirror_position_y	float	This parameter controls the properties of the spheric mirror projection mode
[spheric_mirror]	mirror_position_z	float	This parameter controls the properties of the spheric mirror projection mode
[spheric_mirror]	mirror_radius	float	This parameter controls the properties of the spheric mirror projection mode
[spheric_mirror]	dome_radius	float	This parameter controls the properties of the spheric mirror projection mode
[spheric_mirror]	zenith_y	float	This parameter controls the properties of the spheric mirror projection mode
[spheric_mirror]	scaling_factor	float	This parameter controls the properties of the spheric mirror projection mode
[localization]	sky_culture	string	sets the sky culturesky culture to use. Valid values are defined in the second column of data/skycultures.fab. Values: western, polynesian, egyptian, chinese, lakota, navajo, inuit, korean, norse, tupi, maori, aztec, sami. The sky culture affects the constellations
[localization]	sky_locale	string	Sets langauge used for names of objects in the sky (e.g. planets). The value is a short locale code, e.g. en, de, en_GB
[localization]	app_locale	string	Sets language used for Stellarium's user interface. The value is a short locale code, e.g. en, de, en_GB
[stars]	relative_scale	float	changes the relative size of bright and faint stars. Higher values mean that bright stars are comparitively larger when rendered. Typical value: 1.0	[stars]	absolute_scale	float	changes how large stars are rendered. larger value lead to larger depiction. Typical value: 1.0
[stars]	star_twinkle_amount	float	sets the amount of twinkling. Typical value: 0.3
[stars]	flag_star_twinkle	bool	set to false to turn star twinkling off, true to allow twinkling.
[stars]	flag_point_star	bool	set to false to draw stars at a size that corresponds to their brightness. When set to true all stars are drawn at single pixel size
[stars]	mag_converter_max_fov	float	sets the maximum field of view for which the magnitude conversion routine is used
[stars]	mag_converter_min_fov	float	sets the maximum field of view for which the magnitude conversion routine is used
[gui]	base_font_size	int	sets the font size. Typical value: 15	[gui]	base_font_name	string	Selects the font, e.g. DejaVuSans.ttf	[gui]	flag_show_fps	bool	set to false if you don't want to see at how many frames per second Stellarium is rendering
[gui]	flag_show_fov	bool	set to false if you don't want to see how many degrees your field of view is	[gui]	flag_show_script_bar	bool	set to true if you want to have access to the script bar
[gui]	mouse_cursor_timeout	float	set to 0 if you want to keep the mouse cursor visible at all times. non-0 values mean the cursor will be hidden after that many seconds of inactivity
[gui]	flag_script_allow_ui	bool	when set to false the normal movement controls will be disabled when a script is playing true enables them
[gui]	flag_show_flip_buttons	bool	enables/disables display of the image flipping buttons in the main toolbar (see section [sec:imageflipping])
[gui]	day_key_mode	string	Specifies the amount of time which is added and subtracted when the [ ] - and = keys are pressed - calendar days, or sidereal days. This option only makes sense for Digitalis planetariums. Values: calendar or sidereal
[color] [night_color] [chart_color]	azimuthal_color	float R,G,B	sets the colour of the azimuthal grid in RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	gui_base_color	float R,G,B	these three numbers determine the colour of the interface in RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	gui_text_color	float R,G,B	these three numbers determine the colour of the text in RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	equatorial_color	float R,G,B	sets the colour of the equatorial gride in RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	equator_color	float R,G,B	sets the colour of the equatorial line in RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	ecliptic_color	float R,G,B	sets the colour of the ecliptic line in RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	meridian_color	float R,G,B	sets the colour of the meridian line in RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	const_lines_color	float R,G,B	sets the colour of the constellation lines in RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	const_names_color	float R,G,B	sets the colour of the constellation names in RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	const_boundary_color	float R,G,B	sets the colour of the constellation boundaries in RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	nebula_label_color	float R,G,B	sets the colour of the nebula labels in RGB values, where "1" is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	nebula_circle_color	float R,G,B	sets the colour of the circle of the nebula labels in RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	star_label_color	float R,G,B	sets the colour of the star labels in RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	star_circle_color	float R,G,B	sets the colour of the circle of the star labels in RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	cardinal_color	float R,G,B	sets the colour of the cardinal points in RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	planet_names_color	float R,G,B	sets the colour of the planet names in RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	planet_orbits_color	float R,G,B	sets the colour of the orbits in RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	object_trails_color	float R,G,B	sets the colour of the planet trails in RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	chart_color	float R,G,B	sets the colour of the chart in RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	telescope_circle_color	float R,G,B	sets the colour of the telescope location indicator. RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[color] [night_color] [chart_color]	telescope_label_color	float R,G,B	sets the colour of the telescope location label. RGB values, where 1 is the maximum, e.g. 1.0,1.0,1.0 for white
[tui]	flag_enable_tui_menu	bool	enables or disables the TUI menu
[tui]	flag_show_gravity_ui	bool	[color][night_color][chart_color]
[tui]	flag_show_tui_datetime	bool	set to true if you want to see a date and time label suited for dome projections
[tui]	flag_show_tui_short_obj_info	bool	set to true if you want to see object info suited for dome projections
[navigation]	preset_sky_time	float	preset sky time used by the dome version. Unit is Julian Day. Typical value: 2451514.250011573
[navigation]	startup_time_mode	string	set the start-up time mode, can be actual (start with current real world time), or Preset (start at time defined by preset_sky_time)
[navigation]	flag_enable_zoom_keys	bool	set to false if you want to disable the zoom
[navigation]	flag_manual_zoom	bool	set to false for normal zoom behaviour as described in this guide. When set to true, the auto zoom feature only moves in a small amount and must be pressed many times
[navigation]	flag_enable_move_keys	bool	set to false if you want to disable the arrow keys
[navigation]	flag_enable_move_mouse	bool	doesn't seem to do very much
[navigation]	init_fov	float	initial field of view, in degrees, typical value: 60
[navigation]	init_view_pos	floats	initial viewing direction. This is a vector with x,y,z-coordinates. x being N-S (S +ve), y being E-W (E +ve), z being up-down (up +ve). Thus to look South at the horizon use 1,0,0. To look Northwest and up at 45°, use -1,-1,1 and so on.
[navigation]	auto_move_duration	float	duration for the program to move to point at an object when the space bar is pressed. Typical value: 1.4
[navigation]	mouse_zoom	float	Sets the mouse zoom amount (mouse-wheel)
[navigation]	move_speed	float	Sets the speed of movement
[navigation]	zoom_speed	float	Sets the zoom speed
[navigation]	viewing_mode	string	if set to horizon, the viewing mode simulate an alt/azi mount, if set to equator, the viewing mode simulates an equatorial mount
[navigation]	flag_manual_zoom	bool	set to true if you want to auto-zoom in incrementally.
[landscape]	flag_langscape	bool	set to false if you don't want to see the landscape at all
[landscape]	flag_fog	bool	set to false if you don't want to see fog on start-up
[landscape]	flag_atmosphere	bool	set to false if you don't want to see atmosphere on start-up
[landscape]	flag_landscape_sets_location	bool	set to true if you want Stellarium to modify the observer location when a new landscape is selected (changes planet and longitude/latitude/altitude if that data is available in the landscape.ini file)
[viewing]	atmosphere_fade_duration	float	sets the time it takes for the atmosphere to fade when de-selected
[viewing]	flag_constellation_drawing	bool	set to true if you want to see the constellation line drawing on start-up
[viewing]	flag_constellation_name	bool	set to true if you want to see the constellation names on start-up
[viewing]	flag_constellation_art	bool	set to true if you want to see the constellation art on start-up
[viewing]	flag_constellation_boundaries	bool	set to true if you want to see the constellation boundaries on start-up
[viewing]	flag_constellation_isolate_selected	bool	when set to true, constellation lines, boundaries and art will be limited to the constellation of the selected star, if that star is ”on” one of the constellation lines.
[viewing]	flag_constellation_pick	bool	set to true if you only want to see the line drawing, art and name of the selected constellation star
[viewing]	flag_azimutal_grid	bool	set to true if you want to see the azimuthal grid on start-up
[viewing]	flag_equatorial_grid	bool	set to true if you want to see the equatorial grid on start-up
[viewing]	flag_equator_line	bool	set to true if you want to see the equator line on start-up
[viewing]	flag_ecliptic_line	bool	set to true if you want to see the ecliptic line on start-up
[viewing]	flag_meridian_line	bool	set to true if you want to see the meridian line on start-up
[viewing]	flag_cardinal_points	bool	set to false if you don't want to see the cardinal points
[viewing]	flag_gravity_labels	bool	set to true if you want labels to undergo gravity (top side of text points toward zenithzenith). Useful with dome projection.
[viewing]	flag_moon_scaled	bool	change to false if you want to see the real moon size on start-up
[viewing]	moon_scale	float	sets the moon scale factor, to correlate to our perception of the moon's size. Typical value: 4
[viewing]	constellation_art_intensity	float	this number multiplies the brightness of the constellation art images. Typical value: 0.5
[viewing]	constellation_art_fade_duration	float	sets the amount of time the constellation art takes to fade in or out, in seconds. Typical value: 1.5
[viewing]	flag_chart	bool	enable chart mode on startup
[viewing]	flag_night	bool	enable night mode on startup
[viewing]	light_pollution_luminance	float	sets the level of the light pollution simulation

« Advanced Use Contents Precision »